Acetone Demo Video
Gas Demo Video
Methyl Ethyl Keytone Demo Video
Products Providing Superior Hazmat Solutions
Typical hazmat cleanup methods are outdated and wasteful. At Safety-Vac, our products provide more a more practical and cost effective solution.
New Products
Our products can help you reduce hazmat disposal waste by 75%.
Model 14E55-4HC
Power System
- FPZ 1.5 hp regenerative vacuum blower rated for Class I Hazmat service
- Vacuum 5HG, 75 CFM
- 115 Volt single phase power requirement
- 1.5” diameter suction and pressure ports
- Reverse-flow evacuation and transfer cycle allows operator to use the pressure port to rapidly offload recovered material
Service Rating
- High speed surface recovery of low viscosity materials from distances up to 30 ft
Recovery & Containment
- 55 gallon recovery drum grounded to power system
- Automatic overfill protection
- 25 feet of 1.5’’ fuel rated hose with end-to-end electrical continuity
- 18” surface recovery tool/wand extension with replaceable neoprene squeegee blades. Height adjustment for multi-surface operation
Platform
- 46” x 30” steel frame cart with four wheels
- Stainless steel fasteners
- Static grounding reel with 25’ cable
- Aluminum “quick connect” fittings on drums and hoses
- 1 year warranty from manufacturer
Options
- Baldor 1.0 HP AC vacuum motor, switches and power cord connections UL rated for CLASS I & II hazardous location service
- Replaceable cartridge-type particle filter
- Stainless steel deck
Model 14E30-2HC
Power System
- FPZ 1.5 hp regenerative vacuum blower rated for Class I Hazmat service
- 115 Volt single phase power requirement
- 1.5” diameter suction and pressure ports
- Reverse-flow evacuation and transfer cycle allows operator to use pressure-port to rapidly offload recovered material
Options
- Baldor 1.0 HP AC vacuum motor UL-rated for explosive environment services class I and II
- 25’ grounding reel
Recovery & Containment
- 30 gallon recovery drum
- Automatic overfill protection
- 18” surface recovery tool/wand extension with replaceable neoprene squeegee blades. Height adjustment for multi-surface operation
- 20’ of 1.5” vacuum hose
Platform
- Heavy-duty steel-framed handcart with pneumatic tires
- Stainless steel fasteners
- Aluminum “quick connect” fittings on drums and hoses
Service Rating
- High speed recovery of low viscosity materials from distances up to 30 ft from unit at ground level
- Vacuum rated at 5 inches of mercury at 75 cfm
- One year warranty from manufacturer
Model 15G55-3TC
Power System
- Subaru Robin Model EX17 6 hp air-cooled engine
- No-spill oil drain for ease of maintenance
- Full spark arrest
- FPZ K5 or Siemans 15 High pressure regenerative blower system
- Vacuum 8.5 in. HG, up to 200 CFM (see Service Rating for capabilities)
Options
- Diesel engine
- LP Conversion
Recovery & Containment
- Dual 55 gallon drum vacuum recovery system grounded to frame, 100 gallon total holding capacity
- Automatic system overfill protection
- 2” diameter suction and pressure ports
- 50 feet of 1.5” fuel rated vacuum recovery hose with end-to-end electrical continuity
- 18” surface recovery tool/wand extension with replaceable neoprene squeegee blades. Height adjustment for multi-surface operation
- Aluminum quick connect hose fittings
- Reverse flow evacuation and transfer cycle allows operator to use pressure side blower power to rapidly off-load-recovered material
- 50’ capacity live vacuum
- 50’ static grounding reel
Platform
- Towable steel cart with 4’ X 4’ platform, 5th wheel steering and parking brake
- Stainless steel fasteners
- Complete machine weight with full fuel tank: 719 lbs.
- Dimensions: Width – 59 inches Length – 72 inches
Service Rating
- High speed recovery of low to medium viscosity material from distances up to 50’ from unit at depths to eight feet
- below grade (100’ recovery distance at grade level)
- One year warranty from manufacturer
Model 15G100-4TC
Power System
- Subaru Robin Industrial 9 hp air-cooled engine
- No spill oil drain
- Full spark arrest
- High torque industrial centrifugal clutch
- V belt drive
- High pressure regenerative blower system
- Vacuum 10 HG, up to to 225 CFM (see Service Rating for performance capabilities)
Options
- Lombardini or Yanmar Diesel Engine(Model 15G200-DOT)
- LP engine conversion
- HEPA filters
Recovery & Containment
- Dual 55 gallon drum vacuum recovery system grounded to frame, 100 gallon total holding capacity
- Automatic system overfill protection
- 2” diameter suction and pressure ports
- 50 feet of 1.5” fuel rated vacuum recovery hose with end-to-end electrical continuity
- 18” surface recovery tool/wand extension with replaceable neoprene squeegee blades. Height adjustment for multi-surface operation
- Aluminum quick connect hose fittings
- Reverse flow evacuation and transfer cycle allows operator to use pressure side blower power to rapidly off-load-recovered material
- 50’ capacity live vacuum hose reel
- 50’ static grounding reel
Platform
- Towable steel cart with 4’ X 4’ platform, 5th wheel steering and parking brake
- Stainless steel fasteners
- Complete machine weight with full fuel tank: 719 lbs.
- Dimensions: Width – 59 inches Length – 72 inches
Service Rating
- High speed recovery of low to medium viscosity material from distances up to 50’ from unit at depths to eight feet
- below grade (100’ recovery distance at grade level)
- One year warranty from manufacturer
Model 35LRP500-DOT-T
Power System
- Lombardini Model 15LD electric start 10 hp air-cooled diesel engine
- No spill oil drain
- Full spark arrest
- Dual V-belt drive
- Nash Liquid ring vacuum pump system
- Vacuum 24 HG @ 200 CFM
Platform
- 5’ x 12’ 12,000lb gross vehicle weight tandem axle trailer
- Stainless steel fasteners
- Front wheel hubs have electric brakes
Recovery & Containment
- One 500-gallon tank with access hatch
- Automatic system overfill protection
- 2” diameter suction and pressure ports
- 50’ capacity live vacuum hose reel
- 50’ of 1.5” fuel rated hose
- Recovery hose is neoprene with end-to-end electrical continuity
- 18” surface recovery tool/wand extension with replaceable neoprene squeegee blades. Height adjustment for multi-surface operation
- Aluminum quick-connect hose fittings
- Reverse flow evacuation and transfer cycle allows operator to use pressure-side blower power to rapidly off-load-recovered material
- 50’ static grounding reel
- 55 Gallon barrel with diverter valve for dissimilar material collection
- Tank drain valve
Service Rating
- High speed liquid and particle recovery from ground level to 25’ below grade
- Powered emptying and liquid transfer
- One year warranty from engine and blower manufacturers
- Two year warranty on material workmanship and containment
Model 15G200-DOT
Power System
- Subaru Robin Industrial 9 hp air-cooled engine
- No-spill oil drain
- Full spark arrest
- High torque industrial centrifugal clutch
- V belt drive
- High pressure regenerative blower system
- Vacuum 10 HG, up to 225 CFM (see Service Rating for performance capabilities)
Platform
- Highway-Legal 8’ x 5’ 3500 gross vehicle weight single axle trailer with lighting
- Stainless steel fasteners
Recovery & Containment
- Four 55-gallon drum vacuum recovery containment system, for a total fluid capacity of 200 gallons
- Automatic system overfill protection
- 2” diameter suction and pressure ports
- 50 feet of 1.5” fuel rated vacuum recovery hose with end-to-end electrical continuity
- 18” surface recovery tool/wand extension with replaceable neoprene squeegee blades. Height adjustment for multi-surface operation
- Aluminum quick-connect hose fittings
- Reverse flow evacuation and transfer cycle allows operator to use pressure side blower power to rapidly off-load-recovered material
- 50’ static grounding reel
- 50’ capacity live vacuum hose reel
Platform
- Towable steel cart with 4’ X 4’ platform, 5th wheel steering and parking brake
- Stainless steel fasteners
- Complete machine weight with full fuel tank: 719 lbs.
- Dimensions: Width – 59 inches Length – 72 inches
Service Rating
- High speed recovery of low to medium viscosity material from distances up to 50’ from unit at depths to eight feet below grade (100’ recovery distance at grade level)
- One year warranty from manufacturer
Model 35LRP200-DOT-T
Power System
- 10 hp air-cooled electric start Yanmar diesel engine
- No spill oil drain
- Full spark arrest
- Dual V-belt drive
- Liquid ring pump system
- Vacuum 24 HG @ 200 CFM
Platform
- 5’ x 8’ 3500 lb gross vehicle weight trailer
- Stainless steel fasteners
- Wheel hubs have electric brakes
Recovery & Containment
- One 200-gallon tank with access hatch
- Automatic system overfill protection
- 2” diameter suction and pressure ports
- 50’ capacity live vacuum hose reel
- 50’ of 2” fuel rated hose
- Recovery hose is neoprene with end-to-end electrical continuity
- 18” surface recovery tool/wand extension with replaceable neoprene squeegee blades. Height adjustment for multi-surface operation
- “Stinger” recovery tool for tank and sump recovery
- Aluminum quick-connect hose fittings
- Reverse flow evacuation and transfer cycle allows operator to use pressure-side blower power to rapidly off-load-recovered material
- 50’ static grounding reel
- Tank drain valve
Service Rating
- High speed liquid and particle recovery from ground level to 25’ below grade
- Powered emptying and liquid transfer
- One year warranty from engine and blower manufacturers
- Two year warranty on material workmanship and containment